LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> SX4 Crossover, Standard Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brakes >> Repair Instructions >> Rear Brake Disc Removal and Installation >> Removal

Rear Brake Disc Removal and Installation: Removal

  1. Hoist vehicle and remove wheel.
  2. Remove brake caliper assembly referring to REAR DISC BRAKE CALIPER REMOVAL AND INSTALLATION .
    NOTE: If the removed brake caliper is left hung by the brake hose, the brake hose may be damaged due to the tension caused by the caliper's weight. Hang a removed brake caliper with a wire hook or the like to relieve the brake hose of the tension.
  3. Pull brake disc off by using M8 bolts (1) (2 pcs.).
    Fig 1: Pulling Brake Disc Off By Using M8 Bolts
    G06868536Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals