Rear Brake Disc Removal and Installation: Installation

Reference:  REAR BRAKE DISC INSPECTION  

Install in reverse order of removal noting the following.

• Tighten caliper carrier bolts to specified torque.

  Tightening torque 

  Caliper carrier bolt (a): 60 N.m (6.0 kg-m, 43.5 lbf-ft) 

  Fig 1: Identifying Caliper Carrier Bolt

  Courtesy of SUZUKI OF AMERICA CORP.
• Install rear wheel referring to WHEEL (WITH TIRE) REMOVAL AND INSTALLATION .
• Upon completion of installation, perform brake test.