Rear Brake Disc Inspection

Reference:  REAR BRAKE DISC REMOVAL AND INSTALLATION  

• Using magnetic stand and with dial gauge positioned at about 10 mm (0.39 in.) inward from periphery of disc, measure deflection of disc.

  If limit value is exceeded, replace correct or replace.

  Rear brake disc deflection 

  Limit: 0.10 mm (0.004 in.) max  .

  Special Tool 

  1. 09900-20607 
  2. 09900-20701 
     Fig 1: Checking Rear Brake Disc Deflection

     Courtesy of SUZUKI OF AMERICA CORP.
• Using micrometer, measure thickness of brake disc.

  If limit value is exceeded, replace brake disc.

  Rear brake disc thickness 

  Standard: 9 mm (0.354 in.) 

  Limit: 8 mm (0.315 in.) 

  Fig 2: Checking Rear Brake Disc Thickness

  Courtesy of SUZUKI OF AMERICA CORP.