LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> SX4 Crossover, Standard Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake Control System & Diagnosis >> Repair Instructions >> Front Brake Hose and Pipe Removal and Installation >> Removal

Front Brake Hose and Pipe Removal and Installation: Removal

  1. Remove battery referring to BATTERY REMOVAL AND INSTALLATION .
  2. Remove air cleaner assembly referring to AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION .
  3. Remove intake manifold referring to INTAKE MANIFOLD REMOVAL AND INSTALLATION .
  4. Hoist vehicle and remove front wheel referring to WHEEL (WITH TIRE) REMOVAL AND INSTALLATION .
  5. Clean dirt and foreign material from both flexible hose end and pipe end fittings.
  6. Drain brake fluid in reservoir.
  7. Remove brake flexible hose or pipe.
scientia non olet · About LEMON Manuals