DTC Detecting Condition and Trouble Area
C1063: SYMPTOM DIAGNOSIS REFERENCE CHART
| DTC Detecting Condition |
Trouble Area |
- Solenoid valve power supply driver circuit is opened, shorted to power and ground circuit in ABS control module.
- Solenoid valve power supply voltage is too low.
- Solenoid valve power supply driver is stuck to ON or OFF position.
- Output circuit from control unit is opened or shorted in ABS control module.
- Mismatching solenoid output and solenoid monitor is detected.
|
- Solenoid valve power supply circuit
- ABS control module
|