LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> SX4 Crossover, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Repair Instructions >> Front Seat Heater Switch (Driver and Passenger Side) Inspection (If Equipped)

Front Seat Heater Switch (Driver and Passenger Side) Inspection (If Equipped)

  1. Confirm that ignition switch is OFF position.
  2. Remove console box.
  3. Disconnect seat heater switch coupler and remove seat heater switch.
  4. Check for continuity between terminals at each switch position as shown below. If check result is not as specified, replace.
    Fig 1: Inspecting Front Seat Heater Switch (Driver And Passenger Side)
    G06868922Courtesy of SUZUKI OF AMERICA CORP.