LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> SX4 Crossover, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Horns >> Instrumentation/Driver Information/Horn >> Schematic and Routing Diagram >> Combination Meter Circuit Diagram >> Terminal arrangement of coupler (View: [A])

Terminal arrangement of coupler (View: [A])

Fig 1: Identifying Terminal Arrangement Of Coupler
G06869149Courtesy of SUZUKI OF AMERICA CORP.
TERMINAL ARRANGEMENT OF COUPLER

Terminal Circuit Terminal Circuit
G241-1 Power supply G241-17 -
G241-2 Ground G241-18 -
G241-3 - G241-19 -
G241-4 Fuel level sensor signal G241-20 -
G241-5 Fuel level sensor ground G241-21 Backup power supply
G241-6 - G241-22 -
G241-7 - G241-23 Front right turn signal switch
G241-8 - G241-24 Front left turn signal switch
G241-9 - G241-25 EPS warning light control signal (if equipped)
G241-10 - G241-26 -
G241-11 Air bag warning light control signal G241-27 CAN communication line (low) to 4WD control module
G241-12 - G241-28 CAN communication line (low) to each control module
G241-13 Illumination control output signal (if equipped) G241-29 CAN communication line (high) to 4WD control module
G241-14 - G241-30 CAN communication line (high) to each control module
G241-15 Ground G241-31 -
G241-16 Illumination control output signal (if equipped) G241-32 Lighting switch (high beam)