LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> SX4 4WD L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Drive Axles, Bearings and Joints >> Axle Shaft Assembly >> Description and Operation >> Front Drive Shaft Construction

Front Drive Shaft Construction




Front Drive Shaft Construction

A constant velocity ball joint is used on the wheel side of both right and left side drive shaft assemblies. A tripod type constant velocity joint is used on the differential side and center shaft side. The drive shaft can slide through the tripod joint in the extension / contraction direction.
scientia non olet · About LEMON Manuals