LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator RMZ-4 >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels & Tires >> Repair Instructions >> Wheel: Inspection >> Aluminum Wheel

Aluminum Wheel

  1. Check tires for wear and improper inflation.
    Fig 1: Checking Tire Lateral And Radial Runout
    G06444725Courtesy of SUZUKI OF AMERICA CORP.
  2. Check wheels for deformation, cracks and other damage. If deformed, remove wheel and check wheel runout.
    CAUTION: DO NOT use center hole cone-type clamping machines to hold the wheel assembly during tire removal/installation or balancing or damage to the wheel paint, cladding or chrome may result. Use only rim-type or universal lug-type clamping machines to hold the wheel assembly during servicing.
    1. Remove tire from wheel and mount wheel on a tire balance machine.
    2. Set dial indicator as shown in illustration. Refer to [SERVICE DATA AND SPECIFICATIONS ].
  3. Check front wheel bearings for looseness.
  4. Check front suspension for looseness.
scientia non olet · About LEMON Manuals