LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator RMZ-4 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Performance - VQ40DE - (5 Of 6) >> DTC P0037, P0038, P0057, P0058: HO2S2 Heater >> DTC Confirmation Procedure >> With SDT

With SDT

  1. Turn ignition switch ON and select "Data list" mode with SDT.
  2. Start engine and warm it up to the normal operating temperature.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. Turn ignition switch OFF and wait at least 10 seconds.
  6. Start the engine and keep the engine speed between 3, 500 RPM and 4, 000 RPM for at least 1 minute under no load.
  7. Let engine idle for 1 minute.
  8. Check 1st trip DTC.
  9. If 1st trip DTC is detected, go to [Diagnosis Procedure ].
scientia non olet · About LEMON Manuals