LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator RMZ-4 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Exhaust System >> Repair Instructions >> Exhaust Manifold: Removal and Installation [VQ40DE] >> Removal (RH)

Removal (RH)

  1. Remove three way catalyst (RH). Refer to [Three Way Catalyst: Removal and Installation [VQ40DE] ].
  2. Remove heat shield from lower dash panel.
  3. Remove support bolts from A/T fluid charging pipe (A/T models). Refer to TRANSMISSION ASSEMBLY: COMPONENT .
  4. Loosen nuts in reverse order as shown.
    Fig 1: Identifying Exhaust Manifold Nuts In Sequence
    G06444667Courtesy of SUZUKI OF AMERICA CORP.
    • <==: Front
      NOTE: Disregard the numerical order No. 7 and 8 in removal.
  5. Remove exhaust manifold (RH) and exhaust manifold cover (RH) together.
  6. Remove gaskets.
    CAUTION: Cover engine openings to avoid entry of foreign materials.
scientia non olet · About LEMON Manuals