LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator RMZ-4 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Exhaust System >> Repair Instructions >> Exhaust Manifold and Three Way Catalyst: Removal and Installation [QR25DE] >> Installation >> Exhaust Manifold

Exhaust Manifold

  1. If stud bolts were removed, install them and tighten to the specified torque.

    Exhaust manifold stud bolt: 14.7 N.m (1.5 kg-m, 11 ft-lb) 

  2. Tighten nuts in numerical order as shown in illustration.
    Fig 1: Identifying Exhaust Manifold Stud Bolt In Sequence
    G06444660Courtesy of SUZUKI OF AMERICA CORP.
  3. Tighten nuts in numerical order as shown again.
scientia non olet · About LEMON Manuals