LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator RMZ-4 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Exhaust System >> Repair Instructions >> Exhaust Manifold and Three Way Catalyst: Removal and Installation [QR25DE] >> Installation >> Air Fuel Ratio Sensor 1

Air Fuel Ratio Sensor 1

CAUTION:
  • Do not over tighten air fuel ratio sensor 1. Doing so may cause damage to air fuel ratio sensor 1, resulting in the "MIL" coming on.
  • Before installing new air fuel ratio sensor 1, clean exhaust system threads using a heated oxygen sensor thread cleaner and apply anti-seize lubricant.

Tool number: - (J-43897-12) 

: - (J-43897-18) 

scientia non olet · About LEMON Manuals