Removal Of Liquid Gasket Sealing

After removing nuts and bolts, separate the mating surface and remove old liquid gasket sealing using Tool.

Fig 1: Removing Old Liquid Gasket Sealing Using Tool
Courtesy of SUZUKI OF AMERICA CORP.

Tool number: KV10111100 (J-37228)

CAUTION: Be careful not to damage the mating surfaces.
Tap seal cutter to insert it (1), and then slide it by tapping on the side (2) as shown.
In areas where Tool is difficult to use, use plastic hammer to lightly tap the parts, to remove it.
CAUTION: If for some unavoidable reason tool such as screwdriver is used, be careful not to damage the mating surfaces.