LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator RMZ-4 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - VQ40DE >> Repair Instructions >> Water Inlet and Thermostat Assembly: Removal and Installation >> Removal

Water Inlet and Thermostat Assembly: Removal and Installation: Removal

  1. Remove the engine under cover. Refer to ENGINE ROOM COVER: REMOVAL AND INSTALLATION
  2. Disconnect radiator hose (lower) and oil cooler hose from water inlet and thermostat assembly.
    CAUTION: Cap or plug opening(s) to prevent fluid from spilling.
  3. Remove water inlet and thermostat assembly.
    Fig 1: Identifying Water Inlet And Thermostat Assembly
    G06444549Courtesy of SUZUKI OF AMERICA CORP.
    CAUTION:
    • Do not disassemble water inlet and thermostat assembly.
    • Replace water inlet and thermostat assembly as a unit, if necessary.
scientia non olet · About LEMON Manuals