LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine General Information & Diagnosis - Qr25DE (4 Of 5) >> DTC P1572: ASCD Brake Switch >> DTC Confirmation Procedure >> With SDT

With SDT

  1. Start engine.
  2. Select "Data list" mode with SDT.
  3. Press MAIN switch and make sure that CRUISE indicator lights up.
  4. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    VEHICLE SPEED SPECIFICATION

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Shift lever Suitable position
  5. Check DTC.
  6. If DTC is detected, go to [Diagnosis Procedure ].

    If DTC is not detected, go to the following steps.

  7. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    VEHICLE SPEED SPECIFICATION

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Shift lever Suitable position
    Driving location Depress the brake pedal for more than 5 seconds so as not to come off from the above mentioned vehicle speed.
  8. Check DTC.
  9. If DTC is detected, go to [Diagnosis Procedure ].
scientia non olet · About LEMON Manuals