LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical - Qr25DE >> Repair Instructions >> Rear Oil Seal: Removal and Installation >> Removal

Rear Oil Seal: Removal and Installation: Removal

  1. Remove transmission assembly. Refer to [TRANSMISSION ASSEMBLY: REMOVAL AND INSTALLATION FROM VEHICLE ] (M/T models), [TRANSMISSION ASSEMBLY: REMOVAL AND INSTALLATION FOR QR25DE ] (A/T models).
  2. Remove clutch cover and clutch disk (M/T models). Refer to [CLUTCH DISC, CLUTCH COVER: REMOVAL AND INSTALLATION [5M/T] ]
  3. Remove drive plate (A/T models) or flywheel (M/T models) with power tool. Refer to [ENGINE UNIT: EXPLODED VIEW ].
  4. Remove rear oil seal with a suitable tool.
    CAUTION: Be careful not to damage crankshaft and cylinder block.
scientia non olet · About LEMON Manuals