LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical - Qr25DE >> Repair Instructions >> Drive Belt Auto Tensioner and Idler Pulley: Removal and Installation >> Removal

Drive Belt Auto Tensioner and Idler Pulley: Removal and Installation: Removal

  1. Disconnect battery negative terminal. Refer to [BATTERY: REMOVAL AND INSTALLATION ].
  2. Partially drain engine coolant. Refer to [CHANGING ENGINE COOLANT ].
  3. Remove air cleaner and air duct. Refer to [Air Cleaner and Air Duct: Removal and Installation ]
  4. Remove drive belt. Refer to [DRIVE BELTS: REMOVAL AND INSTALLATION ]
  5. Disconnect upper radiator hose from radiator.
  6. Disconnect coolant reservoir hose from radiator.
  7. Remove lower and upper shrouds. Refer to RADIATOR: EXPLODED VIEW
  8. Remove the power steering oil pump and position aside. Refer to POWER STEERING OIL PUMP: REMOVAL AND INSTALLATION
  9. Remove generator. Refer to GENERATOR: REMOVAL AND INSTALLATION - QR25DE MODELS
  10. Remove drive belt auto-tensioner.
scientia non olet · About LEMON Manuals