LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Auxiliary Emission Control Systems >> Aux. Emission Control Devices - Qr25DE >> Repair Instructions >> EVAP Canister: Removal and Installation >> EVAP Canister >> Removal

EVAP Canister: Removal

  1. Disconnect the EVAP control pressure sensor connector.
  2. Remove the EVAP control pressure sensor and O-ring.
    CAUTION: Do not reuse O-ring.
  3. Disconnect the EVAP canister purge hose.
  4. Disconnect the EVAP vent control valve connector.
  5. Remove the EVAP canister retaining bolt.
  6. Disconnect the fuel tank EVAP breather hose.
  7. Disconnect the EVAP vent control valve hose.
  8. Remove the EVAP canister.
  9. Remove the EVAP vent control valve and O-ring, if necessary.
    CAUTION: Do not reuse O-ring.
scientia non olet · About LEMON Manuals