LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Accessory Drive Belts >> Engine Mechanical - Qr25DE >> Repair Instructions >> How to Select Piston and Bearing >> How To Select Connecting Rod Bearing >> When Crankshaft and Connecting Rod Are Reused

When Crankshaft and Connecting Rod Are Reused

  1. Measure the dimensions of the connecting rod big end diameter and crankshaft pin journal diameter individually. Refer to [ENGINE UNIT: INSPECTION AFTER DISASSEMBLY ] and [ENGINE UNIT: INSPECTION AFTER DISASSEMBLY ].
  2. Apply the measured dimension to the "Connecting Rod Bearing Selection Table".
  3. Read the symbol at the cross point of selected row and column in the "Connecting Rod Bearing Selection Table".
  4. Apply the symbol obtained to the "Connecting Rod Bearing Grade Table" to select connecting rod bearing.
scientia non olet · About LEMON Manuals