Diagnosis Procedure
DIAGNOSIS PROCEDURE CHART
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | CHECK COMBINATION SWITCH Check the combination switch (lighting and turn signal switch). Refer to [COMBINATION SWITCH READING SYSTEM: SYSTEM DESCRIPTION ]. Is the combination switch normal? |
GO TO 2 | Repair or replace the malfunctioning part. |
| 2 | CHECK HEADLAMP (LO) REQUEST SIGNAL INPUT SDT data list
Is the monitor item status normal? |
GO TO 3 | Replace BCM. Refer to [BCM (BODY CONTROL MODULE): REMOVAL AND INSTALLATION ] |
| 3 | HEADLAMP (LO) CIRCUIT INSPECTION Check the headlamp (LO) circuit. Refer to [HEADLAMP (LO) CIRCUIT CHECK ]. Is the headlamp (LO) circuit normal? |
Replace IPDM E/R. Refer to [IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM): REMOVAL AND INSTALLATION ] | Repair or replace the malfunctioning part. |