LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation/Driver Info./Horn >> Repair Instructions >> M/T Finisher >> Removal

M/T Finisher: Removal

  1. Remove cup holder finisher.
  2. Rotate shift knob counterclockwise, then remove.
  3. Pull up to release clips, then remove the M/T finisher.
    Fig 1: Removing M/T Finisher
    G06443228Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals