LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2010 >> SX4 Crossover, 4WD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Rear Brakes (Disc) >> Repair Instructions >> Rear Disc Brake Pad Removal and Installation >> Removal

Rear Disc Brake Pad Removal and Installation: Removal

  1. Hoist vehicle and remove wheel.
  2. Release parking brake lever.
  3. Remove caliper pin bolts (1).
  4. Remove caliper (2) from caliper carrier.
    NOTE: Hang removed caliper (2) with a wire hook or the like so as to prevent brake hose from bending and twisting excessively or being pulled.
    Do not operate brake pedal with brake pads removed.
    Fig 1: Identifying Caliper Pin Bolts
    G06868510Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove brake pads and pad springs.
scientia non olet · About LEMON Manuals