Brake Shoes &/Or Pads: Remove & Replace
WARNING: This page is about the SX4 Crossover, 4WD, Automatic, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable).
Includes: Repack Wheel Bearings (where applicable).
DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| All,Both Axles,Disc | 2.0 | B | ||
| All,Both Axles,Front & Rear,w/Rear Drum Brakes | 2.2 | B | ||
| Both Axles,Front or Rear,Disc | 1.0 | B | ||
| Rear,Both Sides.,w/Drum Brake | 1.2 | B | ||
| Combination Procedure: BRAKE HOSE: Replace: | ||||
| Each Additional | 0.2 | B | ||
| One | Includes: Bleed Brakes. | 0.3 | B | |
| Combination Procedure: CALIPER: Overhaul: | ||||
| Each | Includes: Bleed Brakes. | 0.5 | B | |
| Combination Procedure: CALIPER: Replace: | ||||
| Each | Includes: Bleed Brakes. | 0.3 | B | |
| Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle: | ||||
| 0.5 | B | |||
| Combination Procedure: WHEEL BEARING: Replace: | ||||
| Front,Wheel,One Side | 1.3 | B | ||
| Rear,Wheel,One Side | 0.6 | B | ||