Solenoid Valves (Shift Solenoid Valves, TCC Solenoid Valve and Pressure Control Solenoid Valve) Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect negative cable at battery.
Drain A/T fluid by referring to A/T FLUID CHANGE .
Remove transaxle side cover (1).

Fig 1: Identifying Transaxle Side Cover
Courtesy of SUZUKI OF AMERICA CORP.
Remove solenoid harness from clamp.
Disconnect solenoid connectors (1).

Fig 2: Identifying Solenoid Connectors
Courtesy of SUZUKI OF AMERICA CORP.
Remove pressure control solenoid valve (2) after removing bolt (1).

Fig 3: Identifying Pressure Control Solenoid Valve & Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Remove TCC solenoid valve (1), shift solenoid valve-B (No. 2) (2) and shift solenoid valve-A (No. 1) (3) by removing bolts.

Fig 4: Identifying TCC Solenoid Valve & Shift Solenoid Valve
Courtesy of SUZUKI OF AMERICA CORP.