LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2008 >> SX4 LE, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Diagnostic Information and Procedures >> DTC P0722: Output Speed Sensor Circuit No Signal >> DTC Detecting Condition and Trouble Area

DTC Detecting Condition and Trouble Area

WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION

DTC detecting condition Trouble area
Pulse signals of output shaft speed sensor are not input although pulse signals of input shaft speed sensor are input while vehicle is running.
(1 driving cycle detection logic)
  • Output shaft speed sensor or its circuit malfunction.
  • Improper output shaft speed sensor installation.
  • Damaged sensor rotor.
  • Foreign material attachment to sensor or rotor.
  • TCM
scientia non olet · About LEMON Manuals