LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2008 >> SX4 Crossover, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Clutch) >> Repair Instructions >> Clutch Pedal Inspection >> Cylinder Push Rod Play "a"

Cylinder Push Rod Play "a"

WARNING: This page is about a different variant/trim than selected.
  1. Press clutch pedal (1) gradually with finger, stop when slight increase of resistance is felt and measure how much pedal has moved (push rod play) as represented by "a" as shown.

    Push rod play 

    "a": Max. 3 mm (0.12 in.) 

  2. If "a" is not within specification, replace master cylinder (3) or pedal arm (2).