Clutch Master Cylinder Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Reverse removal procedure for installation noting the following.

Apply grease to push rod tip.
"A": Grease 99000-25100SUZUKI Silicone Grease

Fig 1: Applying Grease To Push Rod Tip
Courtesy of SUZUKI OF AMERICA CORP.
Tighten clutch master cylinder nut to specified torque.
Tightening torque

Clutch master cylinder nut: 13 N.m (1.3 kg-m, 9.5 lb-ft)