LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2008 >> SX4 Crossover, FWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Rear >> Drum >> Repair Instructions >> Rear Brake Shoe Removal and Installation >> Removal

Rear Brake Shoe Removal and Installation: Removal

  1. Remove brake drum referring toRear Brake Drum Removal and Installation .
  2. Push and rotate 90° hold down pin (1) and remove hold down pin (1) and hold down spring (2).
    Fig 1: Removing Hold Down Pin And Hold Down Spring
    G04847579Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove return springs, brake shoes and adjuster.
  4. Disconnect parking brake shoe lever (1) from parking brake cable (2).
    Fig 2: Disconnecting Parking Brake Shoe Lever From Parking Brake Cable
    G04847580Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove push nut (1).
  6. Remove parking brake shoe lever (2) from shoe rim (3).
    Fig 3: Removing Parking Brake Shoe Lever
    G04847581Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals