LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2008 >> SX4 Crossover, FWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Rear >> Disc >> Repair Instructions >> Rear Disc Brake Pad Removal and Installation >> Removal

Rear Disc Brake Pad Removal and Installation: Removal

NOTE: When replacing brake pad, replace it on the right and left.
  1. Hoist vehicle and remove wheel.
  2. Release parking brake lever.
  3. Remove caliper pin bolts (1).
  4. Remove caliper (2) from caliper carrier.
    NOTE: Hang removed caliper (2) with a wire hook or the like so as to prevent brake hose from bending and twisting excessively or being pulled.
    Don't operate brake pedal with brake pads removed.
    Fig 1: Identifying Caliper And Caliper Pin Bolts
    G04847589Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove brake pads and pad springs.
scientia non olet · About LEMON Manuals