LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2008 >> SX4 Crossover, FWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Rear >> Disc >> Repair Instructions >> Rear Brake Disc Removal and Installation >> Removal

Rear Brake Disc Removal and Installation: Removal

  1. Hoist vehicle and remove wheel.
  2. Remove brake caliper assembly referring to Rear Disc Brake Caliper Removal and Installation .
    NOTE: Hang removed caliper with a wire hook or the like so as to prevent brake hose from bending and twisting excessively or being pulled.
    Don't operate brake pedal with brake pads removed.
  3. Pull brake disc off by using 8 mm bolts (1) (2 pcs).
    Fig 1: Pulling Brake Disc Off By Using Bolts
    G04847615Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals