Rear Brake Disc Inspection
- Using magnetic stand and with dial gauge positioned at about 10 mm (0.39 in.) inward from periphery of disc, measure deflection of disc. If limit value is exceeded, replace correct or replace.
Disc deflection
Limit: 0.10 mm (0.004 in.) max.
Special Tool
(A): 09900-20607
(B): 09900-20701
- Using micrometer, measure thickness of brake disc. If limit value is exceeded, replace brake disc.
Brake disc thickness
Standard: 9 mm (0.354 in.)
Limit: 8 mm (0.315 in.)