LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2008 >> SX4 Crossover, FWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Repair Instructions >> Front Brake Hose / Pipe Removal and Installation >> Removal

Front Brake Hose / Pipe Removal and Installation: Removal

  1. Raise and support vehicle properly. Remove tire and wheel.
    NOTE: This operation is not necessary when removing pipes connecting master cylinder.
  2. Clean dirt and foreign material from both flexible hose end and pipe end fittings.
  3. Drain brake fluid in reservoir.
  4. Remove brake flexible hose or pipe.
scientia non olet · About LEMON Manuals