LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2008 >> SX4 Crossover, FWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Repair Instructions >> Brake Booster Removal and Installation >> Removal

Brake Booster Removal and Installation: Removal

  1. Remove master cylinder assembly from booster referring to MASTER CYLINDER REMOVAL AND INSTALLATION .
  2. Disconnect vacuum hose from booster referring to MASTER CYLINDER AND BRAKE BOOSTER COMPONENTS .
  3. Remove front brake pipe (from master cylinder primary and secondary to ABS (ESP®) hydraulic unit pipe) referring to FRONT BRAKE HOSE / PIPE REMOVAL AND INSTALLATION .
  4. Remove clip (1) and then remove push rod clevis pin (2).
  5. Loosen booster mounting nuts (3) and then remove booster.
    Fig 1: Identifying Booster Mounting Nuts
    G04847538Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals