Pressure Plate and Clutch Disc Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Suzuki Reno, 2007 Suzuki Forenza, 2006 Suzuki Reno, and 2006 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the transaxle from the vehicle. Refer to TRANSAXLE ASSEMBLY REMOVAL AND INSTALLATION .
Remove the pressure plate bolts and the pressure plate.

Fig 1: Pressure Plate Bolts And Pressure Plate
Courtesy of SUZUKI OF AMERICA CORP.
Remove the clutch disc from the flywheel.

Fig 2: Clutch Disc
Courtesy of SUZUKI OF AMERICA CORP.