Clutch Master Cylinder Assembly Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Suzuki Reno, 2007 Suzuki Forenza, 2006 Suzuki Reno, and 2006 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Before disconnecting the reservoir tank hose, remove the clutch/brake fluid from the reservoir tank.

Remove the locking clip.
Remove the push rod fixing pin and push rod.

Fig 1: Identifying 2006 Locking Clip And Push Rod Fixing Pin
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the hose clamp on the master cylinder.
Disconnect the master cylinder hose.

Fig 2: Identifying Master Cylinder
Courtesy of SUZUKI OF AMERICA CORP.
Remove the master cylinder pipe.

Fig 3: Identifying Master Cylinder Pipe
Courtesy of SUZUKI OF AMERICA CORP.
Remove the clutch master cylinder nuts.
Remove the clutch master cylinder.

Fig 4: Identifying Clutch Master Cylinder And Nuts
Courtesy of SUZUKI OF AMERICA CORP.