Gearshift Lever Housing Removal and Installation: Installation
WARNING: This page is about a different car, the 2007 Suzuki Reno, 2007 Suzuki Forenza, 2006 Suzuki Reno, and 2006 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
- Install the gearshift lever housing and the gearshift lever housing bolts.
Tighten:
Tighten the gearshift housing bolts to 7 N.m (62 lb-in).
- Adjust the shift linkage.
- Install the console.
- Connect the negative battery cable.