LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2008 >> Reno Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Rear >> Repair Instructions >> Rotor Removal and Installation >> Removal

Rotor Removal and Installation: Removal

  1. Remove the caliper. Refer to Caliper Removal and Installation .
  2. Remove the brake pads.
  3. Remove the caliper mounting bracket.
    Fig 1: Identifying Caliper Mounting Bracket Bolts
    G04717043Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the rotor detent screw.
  5. Remove the rotor.
    Fig 2: Identifying Rotor Detent Screw
    G04717047Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals