Caliper Removal and Installation: Removal
- Raise and suitably support the vehicle.
- Mark the position of the rear wheels relative to the wheel hubs and remove the wheels. Refer to WHEEL REMOVAL AND INSTALLATION
.
- Remove the bolt and the ring seals that attach the brake hose inlet fitting to the caliper.
Courtesy of SUZUKI OF AMERICA CORP.
- Disconnect the brake hose. Plug the openings in the caliper and the brake hose to prevent fluid loss or contamination.
- Remove the caliper mounting bolts from the steering knuckle.
- Remove the caliper.
Courtesy of SUZUKI OF AMERICA CORP.