LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2008 >> Reno Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Repair Instructions >> Vacuum Hose Removal and Installation >> Removal

Vacuum Hose Removal and Installation: Removal

  1. Spread the clip on the vacuum hose connection at the intake manifold and move the clip slightly toward the brake booster.
  2. Pull the hose from the union nut connection. If the hose does not remove easily or is deteriorated, pry off and discard the hose.
  3. Spread the clip on the vacuum hose connection to the brake booster and move the clip clear of the booster.
  4. Remove the vacuum hose.

    See Figure.

scientia non olet · About LEMON Manuals