LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> XL7 Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation/Driver Info./Horn >> Diagnostic Information and Procedures >> High Beam Indicator Inoperative >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the instrument panel cluster.
  2. Test for 5-15 ohms of resistance between the control terminal and the ground terminal of the instrument panel cluster.
    • If the resistance is not within the specified range, replace the instrument panel cluster.
scientia non olet · About LEMON Manuals