LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> XL7 Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation/Driver Info./Horn >> Diagnostic Information and Procedures >> Fog Lamp Indicator Inoperative >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the fog lamp switch.
  2. Test for infinite resistance between the signal terminal and the voltage supply terminal with the switch in the open position.
    • If less than infinite resistance, replace the fog lamp switch.
  3. Test for less than 2 ohms between the signal terminal and the voltage supply terminal with the switch in the closed position.
    • If greater than 2.1 ohms, replace the fog lamp switch.