LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> Reno Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Rear >> Repair Instructions >> Caliper Overhaul and Assembly >> Overhaul

Caliper Overhaul and Assembly: Overhaul

  1. Remove the caliper. Refer to Caliper Removal and Installation .
  2. Apply unlubricated compressed air at the hose inlet of the caliper.
    Fig 1: Applying Compressed Air At Hose Inlet Of Caliper
    G04717066Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the piston from its bore and remove the piston dust seal.
  4. Remove the inner seal from the bore. Avoid scratching the bore.
    Fig 2: Identifying Piston, Dust Seal And Inner Seal
    G04717067Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove the bleeder valve dust cap and the bleeder valve.
    Fig 3: Identifying Bleeder Valve Dust Cap And Bleeder Valve
    G04717068Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals