LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> Reno Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Repair Instructions >> Stoplamp Switch Removal and Installation >> Removal

Stoplamp Switch Removal and Installation: Removal

  1. Disconnect the negative battery cable.
  2. Disconnect the stoplamp switch from the plug connector.
  3. Turn the switch. Remove the switch from the brake pedal bracket.
    Fig 1: Disconnecting Stoplamp Switch From Plug Connector
    G04716984Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals