LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> Reno Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Repair Instructions >> Master Cylinder Disassembly and Assembly >> Disassembly

Master Cylinder Disassembly and Assembly: Disassembly

  1. Remove the master cylinder. Refer to Master Cylinder Assembly Removal and Installation .
  2. Remove the brake fluid reservoir. Refer to Brake Fluid Reservoir Removal and Installation .
  3. Remove the seal ring from the cylinder bore.
  4. Remove and discard the retaining ring from the cylinder body (the non-ABS master cylinder body is shown) using a suitable screwdriver.
    Fig 1: Identifying Retaining Ring, Seal Ring And Cylinder Bore
    G04717002Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove the primary piston (the ABS master cylinder body is shown).
  6. Carefully remove the secondary piston assembly, including the springs, from the master cylinder bore.
    Fig 2: Identifying Primary Piston And Secondary Piston In Cylinder Bore
    G04717003Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals