LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> Aerio Base, FWD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation/Driver Info./Horn >> Repair Procedure >> Ignition Switch Removal and Installation >> Removal

Ignition Switch Removal and Installation: Removal

  1. Disconnect negative cable at battery.
  2. Confirm that ignition key is removed.
  3. Remove steering column hole cover (1).
  4. Remove steering column covers (2), and then turn steering wheel to remove steering column cover screws (3).
    Fig 1: Locating Steering Column Hole Cover (1) And Covers (2)
    G04591579Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove steering column mounting nuts.
  6. Disconnect couplers from ignition switch (1).
  7. Remove ignition switch (1) from key cylinder (2).
    Fig 2: Removing Ignition Switch (1) From Key Cylinder (2)
    G04591580Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals