LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2006 >> Reno Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation/Driver Info./Horn >> Repair Instructions >> Center Molding Removal and Installation >> Removal

Center Molding Removal and Installation: Removal

  1. Disconnect the mode control cable from the mode door.
  2. Remove the center molding.
  3. Disconnect the electrical connector.
    Fig 1: Identifying Center Molding
    G04717748Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals