DTC Detecting Condition and Trouble Area
WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION AND TROUBLE AREA CHART
| DTC detecting condition |
Trouble area |
- Engine is running at 600 RPM or more.
and
- Fixed low signal from ECM to TCM continues for 60 seconds or longer.
or
- Fixed high signal from ECM to TCM continues for 60 seconds or longer.
or
- Tool long or short low signal of pulse signal from ECM to TCM is detected in continuous 8 pulses.
|
- Engine coolant temperature sensor or its circuit malfunction.
- Engine coolant temperature signal circuit from ECM to TCM open or short.
- TCM
- ECM
|