LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2006 >> Aerio Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission) >> Diagnostic Information and Procedures >> DTC P0722 (No. 31): Output Speed Sensor Circuit No Signal >> DTC Detecting Condition and Trouble Area

DTC Detecting Condition and Trouble Area

WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION AND TROUBLE AREA CHART

DTC detecting condition Trouble area
No output shaft speed sensor signal is detected although input shaft speed sensor signals are detected while vehicle is running at 5 km/h (3 mile/h) or more in vehicle speed with "D", "2" or "L" range.
  • Output shaft speed sensor or its circuit malfunction.
  • Improper output shaft speed sensor installation.
  • Damaged sensor rotor.
  • Foreign material attachment to sensor or rotor.
  • TCM