Fuel Gauge Diagnosis
FUEL GAUGE INOPERATIVE
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| 1 |
Is a vehicle speed sensor DTC set? |
- | Go to "DTC TABLE". | Go to Step 2. |
| 2 |
Is the voltage equal to the specified value? |
11-14V | Go to Step 4. | Go to Step 3. |
| 3 | Repair the open circuit between fuse F12 and the instrument cluster. Is the repair complete? |
- | System OK | - |
| 4 | Use an ohmmeter to check the resistance between the ECM connector terminal 107 and instrument cluster connector terminal C1. Is the resistance equal to the specified value? |
0 | Go to Step 6. | Go to Step 5. |
| 5 | Repair the open circuit between the ECM and the instrument cluster. Is the repair complete? |
- | System OK | - |
| 6 | Replace the instrument cluster. Is the repair complete? |
- | System OK | - |